The Specialist Manufacturer of Float & Tilt level switches for Liquids and Bulk Solids
Float switches for pump control Level regulators for pumping stations Float switches for narrow-access tanks Bulk solids level measurement Accessories
Home > News
ATMI

2, avenue des Bosquets
Z.A. de l'Observatoire
78180 Montigny le Bretonneux
FRANCE

  :  +33(0)1 6137 3560
  :  +33(0)1 6137 3569
  :   sales@atmi.fr
News - Float and Tilt Level Switches
Simple and economical water level regulation

Sunday, July 16, 2017

The water level sensors sold by ATMI are used to detect the level of water or liquid in a tank and to activate or stop the filling of the tank. These omnidirectional level sensors are positioned above the tank. When the water level rises and reaches the set limit level, the sensor tilts and stops or switches on the filling of the tank. This allows the emptying and filling functions to be performed.
 
A complete range of level detectors is available at ATMI. They will allow you to detect the level of water and other liquids, the level of drinking water (in this case an ACS certification is required). But some level sensors can also detect the level of aggressive liquids or measure the level of liquid in an explosive area.
ATMI offers omni-directional biconical level sensors that are weighted on a cable: SOBA SMALL, SOBA, SOBA HRHY, SOBA EX, SOBA ACS but also omnidirectional and self-weighted level sensors such as AQUA XL, AQUA MEDIUM and AQUA MEDIUM EP.
 
Heavier, self-weighted devices can pass through a layer of grease accumulated on the surface of the water of the tank.
ATMI also has solid tilt level sxitches (grains, cereals), level detectors specially designed to enter small accesses, level switches directly connected to the pum such as BIP STOP.

More
16/07/2017 - Simple and economical water level regulation
To regulate the water and liquid levels, ATMI offers a simple and economical system: float level sensors that control the level of water and liquids...
04/07/2017 - A full range of accessories for level sensors
ATMI specializes in level sensors for solids and liquids. For a more reliable measurement and to secure the equipment, ATMI offers you a complete...
22/06/2017 - Tilt level switches for very light powders
ATMI proposes a range of tilt level switches that are specially adapted for powder: SOLIBA SPECIAL and SOLIBA SPECIAL EX for explosive areas. They...
10/06/2017 - Grains and cereals - How to measure the level of a silo ?
To know the level of cereals - Oat, wheat, soybean, sunflower, corn, stallions, rice, barley - or grains contained in a silo, try the SOLIBA...
02/06/2017 - Liquid level sensors with small diameter - tuba
To measure the level of water in a tank with narrow access, ATMI offers the TUBA detectors which, thanks to their small diameter can be positionned...
15/05/2017 - Detect the level of Very agitated and turbulent liquids – AT120
AT 120 has been designed to measure the level of liquids with intensive use. It can be used in very agitated and turbulent waters thanks to its...
12/05/2017 - Capture the level of liquids with floats
Float level switches are a simple and effective solution for capturing fluid level. ATMI offers a wide range of floats level switches that are...
30/04/2017 - Aggressive liquid – measure the level
Measurement of the level of an aggressive liquid must be done with suitable equipment. ATMI offers float level switches and regulators of very high...
18/04/2017 - Safe level measurement of liquids and solids –Accessories
ATMI is specialized in solids and liquids level measurement. In order to have a safe and accurate control of the quantity of liquids and solids, ATMI...
14/04/2017 - To regulate the level of drinkable water – SOBA EP
The SOBA EP tilt level switch is ACS certified. It means that it can be used in drinkable water. By tilting when the level is high it can activate or...
05/04/2017 - To measure the level of a solid - Explosive area
The devices used to measure the level of cereals, powders, feed, grain in a silo or container must be Atex certified. Atmi suggest you the SOLIBA EX...
29/03/2017 - Soba range – Omnidirectionnal liquids level regulators
To regulate the level of a liquid in a tank or in a cistern, ATMI advice you to use two SOBA omnidirectional level regulators for the wanted high and...
21/03/2017 - Liquids detection & regulation with a narrow access Tuba Range
Description TUBA float level switches have been designed to control and regulate the level of various liquids in tanks and cisterns with a narrow...
13/03/2017 - SOLIBA a simple and reliable solids level measurement
Soliba is a mechanical solids level technology based on a very simple system. It is suspended vertically. When the solid in the silo has reached the...
06/01/2017 - 4 float level switches ranges for liquids
If you are looking for a float level switch to do all types of automatic regulations of liquids level (automation) for pumps of all powers and for...
03/01/2017 - Level control with floats – Quality and certifcates
Expert in making floats for liquids and solids level measurement. ATMI is part of a qualitative approach that includes all aspects of the business...
25/12/2016 - Optimize your level measurement with accessories
Specialised in the conception of systems to measure and regulate liquids and solids level with floats and tilt level switches, ATMI recommends you...
13/12/2016 - Very resistant floats for agressive mixtures
In some industry sectors, aggressive liquids are frequently used: chemical, pharmaceutical, oiland gas, and shipping. To measure and control their...
10/12/2016 - Liquids and solids levels - detection and regulation
A large range of floats and tilt level switch is proposed by ATMI to detect, regulate the level and stop the filling of different liquids and solids...
25/11/2016 - Solid tilt level switches: atex certification
To evaluate the level of solids such as grains, powder and bulk solids. ATMI offers you different solution.You can choose either a standard model or...
Page:1 . 2 . 3 . 4
Back to top of page