The Specialist Manufacturer of Float & Tilt level switches for Liquids and Bulk Solids
Float switches for pump control Level regulators for pumping stations Float switches for narrow-access tanks Bulk solids level measurement Accessories
Home > Products > Float switches for Pumps > Floats switches for pump control
Floats switches for pump control

Our level switches for pump control have been designed for a direct connection to low power pumps or to high power pumps by using a relay. The microswitch inside the level switch tilts when the liquid level rises in pumping stations, tanks or in any other application where the float has been installed. If there is no liquid, the level switch remains in a vertical position, suspended by the electrical cable. When the level rises, the microswitch of the float will tilt and close or break the circuit. See installations diagrams on the left.

Our level switches open or close the pumps’ power supply either directly or through a relay. The switching differential between the low and high level is determined by the distance between the float and the fixation point of the electrical cable. If the float is equipped with an adjustable ballast on cable, then the switching differential is determined by the distance between the ballast and the float (maximum recommended: 1.50m.)

Thanks to the diverse technical specifications of our level switches, you will find in our range the ideal float switch for your single phase pumps and others.

Several types of cable hangers and ballasts are available in option. For more information, see our Accessories section.

BIP STOP

DescriptionFloat level switch for small pumps
ApplicationSlightly aggressive liquids
Switching angle+/- 110º
Maximum pressure3,5 bars

Product description

AT 120

DescriptionFloat level switch for intensive use
ApplicationSlightly aggressive liquids
Switching angle+/- 120º
Maximum pressure3,5 bars

Product description

AT 120 HR HY

DescriptionDouble waterproof float switch encased in a vulcanised HR HY (High Resistance) housing
ApplicationAggressive liquids (acids, solvents, corrosive liquids, hydrocarbons, sea water, etc.)
Switching angle+/- 120º
Maximum pressure4 bars

Product description

ATS 165

DescriptionFloat level switch for very agitated liquids (tower tanks for example, etc.)
ApplicationSlightly aggressive liquids
Switching angle+/- 165º
Maximum pressure3,5 bars

Product description

ATS 165 EP, ACS certified

DescriptionACS certified float level switch (ACS = Sanitary Conformity Certification)
ApplicationDrinking water meant for human consumption
Switching angle+/- 165º
Maximum pressure3,5 bars

Product description

Back to top of page